Flotation Cushion (Non-Sterile)

Product Description

• Exclusive design, when applying pressure, the cushion can disperse the pressure evenly at the point of application, providing the general who requires to sit for a long time or long-term wheelchair bound personals. Effective relief for people with bed sores and avoiding deterioration.
• The first step is reduction in development of pressure sores or bedsores in change to the pressure point of the liner and padding itself every two hours or as prescribed by the doctor. When sitting on this cushion, it is important to be able to self-support up and down often as possible to prevent continuous compression of the area around the prominence of the bone.

Product Specifications

• Ingredients / Materials:Connecting tube type airbag seat (CR rubber material): Anti-Bacteria fabric + cotton fabric + rubber (CR)
• Product Dimensions:41 cm (L) x 41 cm (W) x 60 mm (D) ± 0.2 cm.

Product Features:

•  1. The use of connecting tube design, balloon-type particle concave and convex structure design have the effect of air permeability.
• 2. Airbag air cushion pressure relief function is able to disperse the hip pressure and provides auxiliary massage effect.
• 3. Effectively reduce bedsores.
• 4. Regularly check the inflation status to check the airbag is fully inflated.

How to adjust comfort level:

Every individual has different measurements of softness and hardness. Cushion is more supportive when is fully inflated. When it is soft, it is not pressed at the bone prominence. According to following the guideline’s below, Personalized fine-tuning is possible.

• 1. Rotate the valve counterclockwise to loosen it. Do not sit on cushion at this point of time.
• 2. Connect the hose sleeve on the hand pump to the top of the leak valve. Make sure the air inlet passage is closed.
• 3. Use a hand-held pump to inflate the seat until it is slightly hard, take turns to complete the two areas and close the inflatable valve clockwise.
• 4. At this point, the user may sit on the cushion.
• 5. Place your hand between the seat cushion and area of your hip.
• 6. Open the valve and slowly start releasing the air a little to adjust its comfortable softness. Note: The softest is only put to the height of 2cm between the seat and the saddle.
• 7. Cushion is now completely set-up.

Easy Fix:

If the cushion is accidentally punctured by less than 1mm in diameter, it can be repaired by using the included simple repair patch.

• 1. Inflate the cushion and place it in water.
• 2. Remove from water and circle where ever the bubbles bloat.
• 3. Wipe dry.
• 4. Apply glue.
• 5. Apply patch.
• 6. Press on for about 10 seconds (increase if required)
• 7. May be use after 20 hours.
• 8. If the diameter of the damage is larger than 1mm, please send it back to the original factory to see if it can be repaired.

Instructions for use:

• 1. Put the seat protector on the seat cushion.
• 2. Place the seat cushion on the seat or wheelchair.
• 3. Check if the seat cushion is being laid flat on the seat or wheelchair.
• 4. It is recommended to check the seat cushion once before each use and adjust the comfort level according to individual conditions.
• 5. If you purchase the "connecting tube type airbag seat", do take note of the seat protector cover as it has two notches at the end of the valve outlet.
• 6. "Connecting tube type airbag cushion seat" can be adjusted separately for dual chambers to increase positioning and stability

Storage & Maintenance:

• Hand or washing machine wash, do not wash with bleach
• Do not place in high temperature area (Such as: exposure under the sun) To avoid material deformation and shortening of shelf life.
• Do not use a brush, sharp objects to wipe or brush the product to avoid deformation.

Buyer's Guide:

• The photos of the products are displayed to ensure that the photos are consistent with the actual product, however, due to lighting, monitor color deviation, personal different understanding of color, color of the product may vary with photo. Such issues are not defects, the final color to the actual goods shall prevail, not in the scope of return or exchange.
• 1. Due to personal hygiene factors, once product is in contact with water, or individual whom may feel the risks of affecting health, product cannot be returned.
• 2. Returned goods must be in new condition (no scratches) and should have complete packaging [including the main product, accessories, internal and external packaging bags (boxes), gifts, etc. and accompanying documents and information], otherwise the product cannot be returned.

Note:

• 1. A competent person should assist young children or elderly in usage.
• 2. Please use this product in accordance with personal health condition.
• 3. This product is recommended for normal usage.
• 4. Do not keep in contact with open wound and not recommended for allergic skin.
• 5. Do not allow children or others who are incapable of self-care to use it alone. Prohibit use by high-risk patients (high blood pressure, heart disease, etc.).

Name of Company: Lain Hong Co,. Ltd

Address: No.235-61, Zhuzijiao, Xinhua Dist., Tainan City 71244, Taiwan (R.O.C.)

Inquiry hotline: (06) 598-1079

Pharmaceutical license number: 6205060168

Name of manufacturer: Lain Hong Co,. Ltd & Shian Jia Meei Co,.Ltd

Manufacturer Address: NO.5, Hua Yuan 2nd St., Pei Hua Village Guan Miao Hsiang, Tainan Hsien 71842, Taiwan

License number: 6105030015